14 x 12VDC outputs
35A maximum output current
30A maximum charging current
Solar 28 Amp
Lithium (LiFePO4) compatible
This product is specifically designed for and exclusively supplied in a range of Jayco recreational vehicles.
LITHIUM COMPATIBLE BATTERY MANAGEMENT SYSTEM FOR COMFORTABLE CAMPING OFF THE GRID
J35 Model D is lithium compatible battery management system specifically designed for Jayco Australia. It features a built-in solar regulator and a multi-stage battery charger to ensure long battery life.
Use J35D to charge all types of lead acid batteries as well as lithium (LiFePO4) batteries. J35 allows charging of battery banks of up to 600Ah in capacity.
J35D allows you to charge the caravan battery to the optimal charge level from 230-240 Volt mains, your solar panel (28 Amp, or three panels 450W total), or from any auxiliary input, such as a power generator or your vehicle.
J35D will increase the life span of your battery thanks to the multiple battery protection features, such as low voltage disconnect, storage mode and multistage charging. There are 14 outputs to connect your DC appliances, including hot water, water pump, lights, and many more. Built in electronic fuses protect the loads.
Offered as an option in a range of Jayco caravan models, the J35D can recover and charge a heavily discharged LiFePO4 battery. The internal Battery Management System (BMS) of a LiFePO4 battery will turn off if it detects that the battery is heavily discharged. The J35D will provide the voltage to restart the LiFePO4 battery?s BMS and then commence charging of the LiFePO4 battery.
Pair J35D with the monitor, such as JControl, or a JHub app, to monitor your caravan power and control its functions.
We recommend using J35D power and battery management system with BMPRO Invicta Lithium batteries.
Input Voltage Range: 240 VAC nominal, ? 10%, 50-60 Hz
Input Surge: < 40 A (cold start) Output Current: 35A Continuous (load + battery current) Factory Set Voltage: 13.65 V ?2% (Float voltage) Output Ripple Voltage: < 150 mV Over Voltage Protection: < 18 V Over Current Protection: 35A to 38A (load + battery current) Battery Current Limit: 30A max Battery Connect: 10.8 ? 0.2 V Low Voltage Disconnect: 10.8 ? 0.2 V for lead acid, 12.0 ? 0.2 V for LiFePO4 batteries Battery Drain after LVD: < 7mA Efficiency: > 83 %
Cooling Fan: Thermally controlled
Ambient: 0?C ? 50?C
Communication: CAN bus
Weight: 2 kg
Standards: Safety: IEC60335-2-29, IEC62109-1,UL458, CSA, C22.2 No.107-1, EMC: CISPR 14, IEC61000-3-2, IEC61000-3-3 Approvals: RCM, UL, cUL